EPDM Geomembranes
The EPDM Geomembranes are manufactured using syntheticEPDM rubber/Polymer. Our EPDM geomembranes have an elongagtion of over 300% which helps It to confirm to the movement of the soil/earth. The EPDM geomembranes have a temperature resistance from -45c to +160c Hence it can work across the globe in various climate zones. More importantly the EPDM geomebranes are naturally UV resistance. Hence it can perform over 25 years in exposed condition.
The application procedure of the EPDM geomembranes usually involves only 3 steps:
- Excavate the ground compact it to 95%
- Lay a 250-300 GSM Geotextile
- Lay the EPDM geomembarane. And fill/store water.
The overlapse of the EPDM geomembranes are done with seam tape and primer. There is no need of welding and electricity during the installation of the EPDM geomembranes.
While the conventional plasric geomembranes are very economical, They need to be replaces every few years as they become crack and brittle under UV exposure. The EPDM geomembranes have a survive life beyond 25 years.
| PolygommaTM EPDM Geomembranes Product Range | ||
|---|---|---|
| Thickness | Width | Length |
| 0.80 mm (31.5 mil) | 1.2 meters, 3 meters, 6 meters | 30 meters |
| 1.00 mm (40 mil) | 1.2 meters, 3 meters, 6 meters | 30 meters |
| 1.14 mm (45 mil) | 1.2 meters, 3 meters, 6 meters | 30 meters |
| 1.20 mm (47 mil) | 1.2 meters, 3 meters, 6 meters | 30 meters |
| 1.50 mm (60 mil) | 1.2 meters, 3 meters, 6 meters | 30 meters |
| 2.00 mm (80 mil) | 1.2 meters, 3 meters, 6 meters | 30 meters |
| We can manufacture higher widths and lengths upon request. | ||
Hypalon® is a registered trademark of E.I.
DuPont de Nemours and Co. inc
| Thickness | 0.8 mm to 6.0 mm |
| Color | Black |
| Brand | Polygomma |
| Usage/Application | Lining of landfills, and various artificial water containment structures |
| Packing Type | In roll form |
| Material | EPDM |
UV Resistant
Long Life
Recycle
Waterproof
Chemical/ Corrosion
Resistant
Landfills
Industrial Waste
Pits
Click Here to inquire with us about our EPDM Geomembrane
Click Here For Our Disclaimer Clause
Concrete Sealer
Flexi-Crete Penetrating Concrete Sealer (PCS), is a clear, non-toxic, odorless, water-soluble liquid compound, that hardens, densities and dust proofs new and existing concrete floors.When Flexi-Crete PCS is applied on a concrete floor, it reacts with the free lime, and calcium in the concrete to form insoluble calcium silicate hydrate. This makes the concrete waterproof and increases its strength and abrasion resistance.To give it a shine, a surface treated with Flexi-CretePCS can be buffed using a hogs hair pad of around 500-800 grit, depending on the amount of shine required.
| Product Details: | ||
|---|---|---|
| Resistant Type | Abrasion Resistance. | |
- Penetrates the concrete surface. No film or coating is formed on the surface.
- Increases the hardness of the concrete surface.
- Densifies and dust proof concrete floors.
- Ready to use
- Easy to apply
- UV stable.
© Polygomma Industries Pvt. Ltd. All Rights Reserved (Terms
of Use)Developed and Managed by IndiaMART InterMESH Limited